Placing in a transmission in your Ford automotive or truck seems like a large job, and it’s. Whereas you don’t need to be a grasp mechanic to perform this operation, it might take endurance, know-how and a lot of elbow grease. With the right instruments, equipments and a helper, a transmission could possibly be put in in a day by anyone with some mechanical aptitude, a working info of the autos’ drive follow and the capability to perform some heavy lifting. Assuming you’ve got already eliminated the unique transmission, putting the new one once more in should not be too troublesome.
Ford Transmission Installation Instructions
1. Set the parking brake, put on your safety glasses and use the jack to elevate the entrance finish of the Ford excessive sufficient that the transmission could also be slid beneath upon getting set it on the jack stands.
2. Place jack stands under the physique in the entrance, making certain to give your self enough space to get at the transmission. Rigorously lower the entrance onto the jack stands.
three. Jack up the rear of your Ford to the similar peak as the entrance and place jack stands beneath the physique in the rear. Rigorously lower the rear onto the jack stands.
four. Switch the transmission into place beneath the automotive. Be careful not to hurt the underside of the transmission when shifting it into place. You want your helper to assist with this step.
5. Slide the jack subsequent to the transmission and elevate the transmission up, then slide the jack beneath it. As soon as extra, you will want the assist of your helper to do this.
6. Jack the transmission up and into place. This will sometimes require some cautious, minute maneuvers to clear the physique and underbody.
7. Use the socket set to arrange the bolts by way of the bell housing and into the once more of the engine block. Likelihood is you will need the prolonged extension to attain the ones at the excessive.
eight. Lower the jack, then transfer it out of the method.
9. Bolt the cross member and transmission mount, then bolt the mount to the transmission.
10. Bolt the driveshaft to the rear of the new transmission and to the rear differential.
eleven. Be a part of the transmission cooler strains to the radiator and any wiring harnesses to the sensors on the transmission, if related. Moreover, you will have to join the dipstick tube at the second by putting it in place, then seating it into the side of the transmission.
12. Be a part of the transmission cooler strains to the radiator and any wiring harnesses to the sensors on the transmission, if related, as well as to the speedometer cable and shift linkage. Moreover, you’ll need to join the dipstick tube at the second by putting it in place, then seating it into the facet of the transmission and bolting it into place.
thirteen. Search the recommendation of your automotive’s specific proprietor’s information for the transmission fluid functionality and pour that amount into the transmission by way of the dipstick tube. When it is crammed appropriately, start the engine, shift the transmission by means of all the gears after which recheck the fluid degree sooner than driving.